[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Off Subject Question



I usually use a coat of spray paint.  The color is unimportant.  After 
etching, a little acetone or paint remover takes it all off.

John  WA4WDL
----- Original Message ----- 
From: "WILLIAMS MICHAEL" <k9qho6762@sbcglobal.net>
To: <amsat-bb@amsat.org>
Sent: Thursday, September 06, 2007 7:24 PM
Subject: [amsat-bb] Off Subject Question


> I'm getting ready to etch a two sided PCB for a satellite related homebrew 
> project. The bottom side is the ground plane which I don't want etched.
>
>  What is the easy way to protect it from the etching solution?
>
>  Electrical tape?
>  Masking Tape?
>  Sharpie Pen?
>
>  Thanks
>
>  Mike
>  K9QHO
>  AMSAT 33589
>
>
>
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
> 


_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home