[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Mounting Elevation part of g-5500

Quick question on mounting a g-5500 elevation router.  Does it matter  
which way you mount it or can you set the controller to know where it  
is?  This is a little hard to explain, but I want to mount it so the  
mass of the controller is horizontal to the ground, not vertical like  
when the az/el are package together.  If I do this, will I be able to  
set the antennas somehow so the controller knows where they are or  
does it determine that on its own?

If I mount it wrong and the controller can not be told where it is  
(ie. calibrated) then all of my degrees would be off by 90 because I  
am mounting the elevation portion horizontal instead of vertical.

I hope this question makes sense, but I don't want to assemble it all  
up high and then findout it doesn't work as planned.

Thanks for any input!


Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb