[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: No Help



At 01:11 28/05/2007, you wrote:
>What has happened to amateur radio? A week ago I put out a request for help
>for my 736R which I use for satellite work. As of this date I have received
>zilch,0,nothing in reply. Are there no more ham repair people out there or
>is everybody an appliance operator???? George W3VVP
>
>_______________________________________________
>Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Not entirely on the 736R, but as a service engineer of many years, 
problems with Florescent display brightness on VCR's has almost 
always ended up as being dried out capacitors in the power supply. 
The Florescent display is driven with a heater voltage and a lowish 
HT voltage. Either of these could cause low brightness display. If 
you have the circuit, on the diagram labeled CNTL UNIT F289...., the 
invertor for these supplies are in top left corner. The suspect 
components are C07, and C09.

Hope this helps. I didn't answer before, as I assumed someone with 
more specific FT736 knowledge would.. if you dont have the diagram, 
let me know off list, I'll scan an email it you. I maybe just on the 
wrong track, but 2  $1 caps is worth a try!

John
G4DMF ( 736R owner and user ). 

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home