[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Feed Line Loss @ Freq vs. Price



While on this subject, has anyone used a "Return Loss Bridge" (RLB) to
measure their actual
total system loss. I was planning on doing that when I get my antenna system
up and
running to give me a base line for future improvements.

Any thoughts?

Thanks.
RoD
KD0XX

A good friend will come and bail you out of jail,
A TRUE friend will be sitting next to you saying.....


"DAMN THAT WAS FUN"

> -----Original Message-----
> From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org]On
> Behalf Of Nate Duehr
> Sent: Thursday, May 10, 2007 3:47 PM
> To: amsat-bb@amsat.org
> Subject: [amsat-bb] Re: Feed Line Loss @ Freq vs. Price
>
>
>
> > This is true.  However, the connectors you must put in line
> from past the
> > rotator
> > to regular LMR-600 to the station would likely eat up all the delta in
> > loss!
>
> To continue the thread accurately - we now need to know how lossy specific
> connectors are.
>
> All of these "runs" described so far are about 40', a "typical" number for
> a small tower or structure many hams might have... but if you're running
> 100' up a tower or structure... the clear winner starts to emerge...
>
> 1/2" (or bigger!) hardline with a short jumper of something flexible at
> the top and high-quality N-connectors at that junction.
>
> Right?  Feel free to do the math... if you can find real world numbers for
> connector losses that you trust.
>
> Also keep in mind if you ever plan on "re-purposing" any of the cable runs
> up the tower for duplexed service (going to put a repeater on the tower
> via one of your runs of cable), LMR is a very VERY poor choice for
> duplexing... its design leads to noise and desense problems.  Not a
> problem in non-duplexed service, though.
>
> --
> Nate Duehr, WY0X
>
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home