[amsat-bb] Re: Pre-amp for IC-910h?

[Andrew Glasbrenner <glasbrenner@xxxxxxxxxxxxxx>]

The Icom units are easy to install and use with the 910, but leave a LOT to be desired in terms of noise figure. It speaks volumes that they do not publish NF specs that I know of...

I'm in the process of replacing mine with older Landwehr units.

73, Drew KO4MA

-----Original Message-----
>From: Martin Grundy <m0ady@m0ady.org.uk>
>Sent: Mar 27, 2007 11:31 AM
>To: amsat-bb@amsat.org
>Subject: [amsat-bb]  Pre-amp for IC-910h?
>
>Hi...
>
>I am thinking of buying a masthead pre-amp for use with the Icom IC-910H
>for both satellite and terrestrial work.
>
>There are the AG-25/35 units from Icom which are specially designed
>for use with the 910. But I have seen the SSB Electronics units on the
>web (SSB-SP-2000/7000) and also the Microset units (PR-145A/430A) and
>wonder if these devices perform better than the Icom units.  Also, would
>the SSB/Microset units require a sequencer.
>
>I would be interested to hear from anyone who has been down this road
>with an IC-910H.
>
>Thanks in advance, 73 Martin M0ADY.
>
>-- 
>Martin Grundy  (M0ADY)  <m0ady@m0ady.org.uk>
>AMSAT-UK: 6314
>_______________________________________________
>Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb