[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: IC-910H + WispDDE Users



I am sending you, separately, the file SATPC32ISS.TXT from Erich Eichmann's 
excellent SatPC32 program, which explains why satellite mode on the 910H 
cannot be used for in-band operations such as the ISS.  Split mode must be 
used, and an additional handshaking line is required between the computer 
and radio to prevent the computer from trying to change the uplink frequency 
while the radio is transmitting.

73,
George, KA3HSW


----- Original Message ----- 
From: "Matt Bennett" <kaisermuche@yahoo.com>
To: <amsat-bb@amsat.org>
Sent: Monday, February 19, 2007 11:41 AM
Subject: [amsat-bb] IC-910H + WispDDE Users


> Hi All,
>
>  Does anyone use this radio and software control combination for same-band 
> operations (like ISS)? I was curious if you were able to tune both the 
> Main and Sub-Band frequencies within the same band and xmit/recieve like 
> normal w/o full duplex operations. If so, what mode are you in when 
> performing these operations (split, sat)?
>
>  Thanks,
>
>  Matt Bennett
>  KF6RTB
>
>
> Matt Bennett
> KF6RTB
> UCISAT Communications Team Member
> University of California, Irvine
> www.ucisat.net
>
> ---------------------------------
> Never Miss an Email
> Stay connected with Yahoo! Mail on your mobile. Get started!
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb 

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home