[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]
Re: IC-910H + WispDDE Users
Hi Matt,
You need to operate your rig in split mode if you want TX/RX in the same band with WiSPDDE.
Regards,
Nando - CX6DD
On Mon, 19 Feb 2007 09:41:41 -0800 (PST)
Matt Bennett <kaisermuche@yahoo.com> wrote:
> Hi All,
>
> Does anyone use this radio and software control combination for same-band operations (like ISS)? I was curious if you were able to tune both the Main and Sub-Band frequencies within the same band and xmit/recieve like normal w/o full duplex operations. If so, what mode are you in when performing these operations (split, sat)?
>
> Thanks,
>
> Matt Bennett
> KF6RTB
>
>
> Matt Bennett
> KF6RTB
> UCISAT Communications Team Member
> University of California, Irvine
> www.ucisat.net
>
> ---------------------------------
> Never Miss an Email
> Stay connected with Yahoo! Mail on your mobile. Get started!
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
AMSAT Home