[amsat-bb] Re: Voltage Requirements of ICOM IC-910H

["Michael Hatzakis Jr MD" <lists@xxxxxxxxxxxx>]

Excellent idea.  Thanks, 

But I think I am going to get on e-bay and pick up a proper supply.  I agree
with the sentiment of the list.

M

-----Original Message-----
From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On
Behalf Of George Henry
Sent: Sunday, January 21, 2007 9:45 AM
To: amsat bb
Subject: [amsat-bb] Re: Voltage Requirements of ICOM IC-910H

The power requirements specified in the 910H manual are 13.8 VDC +/- 15%, 
which is 15.9 V on the high side.  I would not feel comfortable running mine

at that level, however.  I would suggest putting a couple of 100A diodes in 
series with the + side of the power lead to drop it down closer to 13.8.... 
(2 would drop it to about 14.5, which is close to what you might encounter 
in a car with the engine running)

73 de KA3HSW


----- Original Message ----- 
From: "Michael Hatzakis Jr MD" <lists@hatzakis.net>
To: <amsat-bb@amsat.org>
Sent: Saturday, January 20, 2007 2:25 PM
Subject: [amsat-bb] Voltage Requirements of ICOM IC-910H


>I am changing my supply for my ICOM IC-910H because my PS-30 is dying.  I
> have an SGC PS-50 supply that is not regulated, per se, it is a huge 
> supply
> with massive transformers.  It appears to work fine, but I am worried 
> about
> the fact that is starts at 16v or so.
>
> Specifically, is 15.5 to 16v too high to safely run this radio and is a 
> drop
> of 1-1.5 volts too much unregulation for proper operation?
>
> Michael  K3MH
>
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb 

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb