[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: simples and pcsat



At 08:03 AM 1/13/2007, Nick Pugh wrote:

>I am running  pcsat and a Yaesu 736.  How do you control the radio 
>when running simplex?
>
>nick

Hi Nick,

I am guessing you are trying to do packet on 145.825MHz?

I am not that familiar with pcsat but this works for InstantTune
so you could try it on pcsat:

1. Program 3 memory locations with TX/RX pairs as below:
    145.820/145.830, 145.825/145/825, 145.830/145.820

2. set up pcsat for a micbutton receiver with 5 KHz step size

3. connect the micbuttons on the FT736 to your pc

4. set the memory pair to 145.825 and start tuning.

The micbuttons will click up or down based on the RX frequency
and the TX will be set correctly via the memory.

You can use a smaller step size for better resolution if you
have enough memories (I forgot what an FT-736 will do but it
will do at least 5KHz.)

73,
Tony AA2TX



    

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home