[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Crossbooms ... my questions



I homebrewed my antennas and it wouldn't have been that big a deal to 
make crossed yagi's for CP as far as the mechanical end of it went but 
for my first attempts at satellite, I went with  linear polarization 
just for simplicity's sake. I do ok with them on LEO's but since I've 
never had the CP, I can't make a quantitive comparison. My biggest 
stumbling block with CP was figuring the length of phasing harnesses and 
such because I don't have the equipment  to do so. Of course, if you're 
buying a set, I suppose all that's done for you.
73,
Michael W4HIJ
K8TB wrote:
>     As a reasonably long time licensed ham (40 years), but very new to 
> satellites, I would like to ask the brain trust whether CP antennas are 
> really needed. I am ready to buy a set, but in poking around the net, I 
> found this exchange by Mike , K6MYC, about not using CP antennas:
>
> Look at http://www.qth.com/ka9fox/ant-nest.txt
>
> Look towards the bottom, and Mike's replies are in caps.
>
> I do not have the real estate for separate  144/432 antennas for  
> terrestrial and sat. I have the az/el rotors.
>
> So whats the thought on this? Should I just go with a pair of H-pol 
> beams and leave well enough alone, or should I go with the CP antennas?
>
> Tom Bosscher  K8TB
>
>
>
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
>
>
>   

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home