[amsat-bb] Re: Calculating Link Budgets

["Graham Shirville" <g.shirville@xxxxxxxxxxxxxx>]

A couple of other comments!

1: Don't forget to allow for any beacon on the satellite as the power that 
it is using will have to be deducted off the maximum power available per 
user

2: But SSB and CW are not continuous level signals so the actual transponder 
loading will be, on average lower, as a result (unless all the users decided 
to try "wallooing" on the uplink at the same time..........)

3: Jan King's major work on link budgets with a spreadsheet and 
comprehensive guidance notes is available here:
http://www.amsat.org.uk/iaru/ This does not direct deal with linear 
transponders but I know he is working on that. It is however already a very 
useful reference on this subject.

73

Graham G3VZV
----- Original Message ----- 
From: "john heath" <g7hia@btinternet.com>
To: "amsat" <amsat-bb@amsat.org>
Sent: Friday, January 05, 2007 12:01 AM
Subject: [amsat-bb] Calculating Link Budgets


> Hi Bruce and the list,
>
> As usual,  Satellite Handbook by Davidoff K2UBC has the answer. Chapter 8 
> page 12 has a fully worked out calculation on predicting signal levels. 
> Its for a geostationary satellite with a 35W transponder and 70 users as 
> follows:
>
> "The average power allocated to each user is therefore 0.5 watt."
>
> Hope this helps
>
> 73 john g7hia
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
> 

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb