[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

atf 54143 phemt (was MGF1402 source or substitute)



--- Original Message ---
>Date: Tue, 2 Jan 2007 11:43:45 EST
>From: G0MRF@xxxxxxxxx
>Subject: [amsat-bb] Re: MGF1402 source or substitute
>To: tyler881@xxxxxxxxxxxxxx

>Hi Tyler.

>The MGF1402 is an expensive option these days.

>You may want to have a look at this 2m design which will give you 0.3 to
>0.4dB noise figure.

>(http://www.frenning.dk/OZ1PIF_HOMEPAGE/144_and_432MHz-LNA.htm)

>Good luck

>David  G0MRF


Hi everyone,

I was reading about the ATF 54143 PHEMT device, and gathering parts for my 
own 432 LNA not long ago.

The NF and gain specs look very attractive, but I could not find a single 
outlet in the USA to buy one!

A phone call to the Customer Service number for Avego (formerly Agilent) got 
me a sample of 10 qty for absolutely FREE!  I learned
that Avego was not interested in selling less than 1000 pcs (the guy laughed 
when I tried to order 10). He told me that this item was
stocked in Germany, and since I didn't want to buy the minimum qty, he'd go 
ahead and send me a free sample.

I received my sample in about 2 days! They actually put it on an express DHL 
shipment..

It might have helped that I mentioned being a ham, and that my club and I 
were planning to build some LNAs.. If the name Agilent sounds
familiar, it's because they also make BPL devices.. Maybe they wanted to 
appease a ham for a change? hi hi

73 and GL,

Kyle Yoksh
K0KN
Olathe, Kansas
Amsat # 35249

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home