[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Sat-PC-32



Is this because the ICOM does not support hardware handshaking?  Or is it a
"deeper issue"...?!

Michael

-----Original Message-----
From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On
Behalf Of Erich Eichmann
Sent: Tuesday, December 05, 2006 4:20 AM
To: Stefan Wagener
Cc: amsat-bb@amsat.org
Subject: [amsat-bb] Re: Sat-PC-32

Hi Stefan,
I had hoped, nobody would disclose that secret, hi.

Seriously:
The TS-2000 is connected to the PC via it's DB9 serial port. With this radio
the program for certain reasons  is using hardware handshaking. If the
TS-2000 is
switched off first the program is missing the CTS signal from the radio and
waiting for it  until "TimeOut".

With the Icom radios  the program works without
handshaking.

73s, Erich, DK1TB

----- Original Message ----- 
From: "Stefan Wagener" <stefan_wagener@hotmail.com>
To: "'Jim K0SBH'" <k0sbhjim@sbcglobal.net>; "'Amsat Amsat BB'"
<amsat-bb@amsat.org>
Sent: Tuesday, December 05, 2006 3:28 AM
Subject: [amsat-bb] Re: Sat-PC-32


> Hi Jim.
>
> It is question of preference. SatPC32 really prefers Kenwood over Icom.
The
> software is so closely attached (in love) with the TS2000 that it
> desperately tries to keep the relationship going, even after the TS2000
> broke off (for a while). However, it doesn't care for the Icom so much.
The
> 910 can be gone or not. The program can quit anytime and move on.
>
>
> 73, Stefan VE4NSA (Sorry, I couldn't resist)
>
> PS. I hope that Erich will forgive me... :-)
>
> -----Original Message-----
> From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On
> Behalf Of Jim K0SBH
> Sent: December 4, 2006 7:45 PM
> To: Amsat Amsat BB
> Subject: [amsat-bb] Sat-PC-32
>
> Hi,
>
>   Have question. I am using Sat-PC-32  V.12.4. When using with the IC-910H
> and turning off the 910H first the program closes with no problem. When I
> use it with the TS-2000X and turn off the radio, the program sometimes had
> trouble closing. With the 2000X turned on the program always closes
> perfectly. So am I missing something?
>
>   Of course I always  close the program first now. Just wondering
>
>   Thanks,
>
>   Jim, K0SBH
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>


_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home