[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Req. help with making a Coax Hybrid



My guess is that the single stub test is rather broad compared
to the full hybrid where there might be a a  multiplying effect
of any small differences.  So being slightly short wouldn't show
up in the single leg test?  I'd be interested in hearing what
you end up with... Bob


> -----Original Message-----
> From: amsat-bb-bounces@amsat.org 
> [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Joop & Tineke
Verdoes
> Sent: Friday, November 17, 2006 7:07 AM
> To: amsat-bb@amsat.org
> Subject: [amsat-bb] Req. help with making a Coax Hybrid
> 
> OM's
> I am at the moment attempting to make a 2m and a 70cm Coax
hybrid
> divider/combiner.
> I get interesting results.
> I have made 3 1/4 and 1 3/4 lamda pieces of 75 Ohm coax.
> - I included the velocity factor (after measuring this)
> - I tested each by using them as a 1/4 or 3/4 impedance
tranformer 100
> Ohm to 50 Ohm, my MFJ 269 sees each of the pieces terminated
with 100
> Ohm, nicely as a 50 Ohm thing, right on the frequency I want
(146 MHz)
> I solder the 4 pieces into a ring, terminate with 50 Ohm at 3 
> ports and
> connect the MFJ at the "TRX" port.
> The thing works (ie shows 50 Ohm with and swr of
1.0).........but at
> 166MHz. At 145Mhz, the swr is 1.2 and the impedance shows some
> reactance.
> Before attempting to make wild guesses which leg of the hybrid
I am
> going to cut/extend, would like to ask whether there is 
> someone who can
> point me in the right direction.
> The coax cable is 3c-2v tv 75Ohm coax.
> It appears that the pieces are a bit too short, but this
doesn't agree
> with my test of each leg seperately as an impendance
transformer.
> 
> Any suggestions?
> 
> Joop, PA1JAV
> 
> 
> 
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of 
> the author.
> Not an AMSAT-NA member? Join now to support the amateur 
> satellite program!
> Subscription settings:
http://amsat.org/mailman/listinfo/amsat-bb
> 

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home