[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]
Re: GTO-Track
- Subject: [amsat-bb] Re: GTO-Track
- From: Paul Williamson <kb5mu@xxxxxxxxx>
- Date: Thu, 19 Oct 2006 19:41:56 -0700
At 7:53 PM -0400 10/19/06, Brad, K1GTo wrote:
>You were a little hasty to shoot down the basis of the idea. If we think
>about it for a moment, how many people do you know with dual-band radios in
>their vehicle? Then think about how many people can full duplex between
>those bands. There are a few but most can't. My 706 can't, and that is what
>is driving me to write this application.
My objection was to the proposed implementation (using a remote
Predict server), not to the function.
However, now that I understand your goal I will say that I am not
really in favor of it. If you run a half-duplex transceiver on an
analog transponder, you will have to rely on guesses and reports from
other operators to set your uplink power level. That's less than
ideal. There's not a lot of range between too weak to hear and too
loud, and that range is not entirely predictable. Perhaps when we
have SDX-based transponders with effective alligator control, it will
be OK to set your power open-loop.
Nonetheless, it's an interesting project and I wish you success.
>As a side note, phase-2 of the project will let the user plug in key
>attributes (probably about 5 numbers) of an upcoming orbit, so they can work
>the sat without network connectivity. Even these calculations can be
>simplified enough to allow for a small phone to continuously tune the TX and
>RX freqs on the radio, or tune the TX after the user adjusts the RX.
I will be interested to see what you come up with along those lines.
I have speculated about something similar, but never stopped to think
it all the way through.
73 -Paul
kb5mu@amsat.org
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
AMSAT Home