[amsat-bb] Re: 10' Dish available

[w7lrd@xxxxxxxxxxx]

Bob
Perhaps my helix feeds would be applicable.  Usually designed for off center dishes.  With fewer turns you would have a wider pattern. 
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&sspagename=STRK%3AMESE%3AIT&viewitem=&item=9725315663&rd=1&rd=1
73 Bob W7LRD
Seattle
-------------- Original message -------------- 
From: "Robert Bruninga" <bruninga@usna.edu> 

> > How does one build a feed to properly illuminate a pizza 
> slice-shaped 
> > reflector? Or is this a matter of 1/4 of a 10' dish being 
> still so 
> > over-kill that you only use the fat end, and under-illuminate 
> that? 
> 
> Well, presumably one will be using this on S-Band either for 
> 802.11 or other 2400 MHz purpose so one has to build his own 
> feed anyway. Probably a dipole over a splashplate. That is 
> typically a good feed for a typical .4 F/D dish? If that is so, 
> then when it is used to illuminate just 1/4th of the dish area, 
> then there is spillover and a few dB are lost. Maybe a good 
> feed for the 1/4 quadrant dish might be a dipole over a 
> splashplate with a director? 
> 
> Someone who is good on feeds might suggest the right answer 
> here... But in any case, one is not trying to illuminate the 
> tastey end tip of the pizza slice, but generally the center of 
> the crusty end... 
> 
> De WB4APR, Bob 
> 
> _______________________________________________ 
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. 
> Not an AMSAT-NA member? Join now to support the amateur satellite program! 
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb 
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb