[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: S Band UP




> >The downlink of EAGLE will be made some where between 5830 to 5850 MHz
>and as far I know the exact frequency segment has been not yet decided  but
>you need a downconverter specifically designed to receive the above band
>when it will be chosen.
>Now if your 2.4 GHz upconverter uses a 2 meter IF then you must use a 70 cm
>IF for your 5.8 GHz downconverter.
>A 70 cm IF allow you to get a better receiver image rejection on downlink
>while not to be IF to IF interfered using a 2 meters IF for the uplink.

Won't this (5830-5850) C Band downlink for Eagle be the same problem 
as S band?  I changed all my cordless phones (4 of them) to the 5.8 
ghz band so they would not crash my 2.4 ghz wireless network. Won't 
my 5.8 ghz phones interfere with hearing Eagle on the 5.8 ghz band? 
My Linksys 2.4 network did not bother my 2.4 ghz old phones but the 
old 2.4 ghz phones brought down my network. The phones are a lot more 
powerful then the network. I assume the same is the case for my new 
5.8 ghz phones.

I guess for satelltes (Eagle anyway) I will just use U/V mode and 
keep my phones and network the way they are. I could have used S band 
down but i really doubt i will be able to use C band down (along with 
all my cordless phones on the same band).

Les W4SCO


_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home