[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: SDX transponder timing delay measurements?



Hi Ken

> As a design goal, it would be helpful to the 
> OD process if the delay could be made consistent 
> within about +/-5 micro-sec -- i.e., 1500 meters 
> (smaller is better).  It is also important to
> quantify the standard deviation to that bias is 
> since that is also factored into the OD process.

I may be wrong, but I can't think of a reason why it wouldn't be well under
this figure. I was thinking more in terms of 100's if not 10's of
nanoseconds.

The SDX (a) takes a batch of samples, (b) does its processing, then (c)
outputs the processed batch of samples.

Each of the three parts takes the same amount of time and all three are
executed in parallel like a production line using DMA for (a) and (c), and
the DSP CPU for (b). This time is dictated by the CPU's crystal oscillator.

I am guessing any variation would be predominantly from the analog circuitry
(R's and C's changing value with temperature?), but Bob may have other
suggestions I hadn't thought of.

73, Howard G6LVB


_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home