[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]


I will apologize in advance as this question has probably been asked several times already.  I am attempting to digi-peat through PCSAT, and PCSAT2 with an Arrow handheld and Kenwood D7A.  Having no trouble using APRS on the ISS, I hope to be able to do the same with PCSAT and maybe even get through PCSAT2 before decommission.
I can decode packets from PCSAT and PCSAT2, but never get a packet through either system.  PCSAT had a 90 degree pass this morning, with no luck.  I am suspicious that my packet path is incorrect, or I don't have enough power to reach the receivers.  
Packet path is ARISS,APRSAT,SGATE,WIDE.  I was recently told that only ARISS was needed for PCSAT, PCSAT2, and ISS.  Having no luck yet and time growing short for PCSAT2, I am hoping to get a definitive answer from the list.  What is the correct packet path?  Can I make it with such limited equipment as a handheld beam and 6 watt HT?
Thanks in advance,
Randy - KI4LMR

Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb