[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: S-band on Eagle



Kyle,
Digital CC Rider transponder requires more bandwidth that a linear 
transponder passing a single SSB or CW signal.
Measurments made using SSB receivers, and recolections of AO-40 reception on 
S Band are NOT valid comparisons.

The 902 MHz to 928 MHz Band in Escondido, Ca. has a solid noise floor of -70 
dBm accross the Band, several years after 900 cordless phones were offered 
for sale. Put that fact in the S Band predictions 5 years from now.

Amateurs should not run away from ISM/License Free intrusion into our bands, 
WE JUST NEED TO MAKE THEM OUTPUTS, and receive on other bands!

Art,
KC6UQH
----- Original Message ----- 
From: <yokshs@sbcglobal.net>
To: "amsat-bb" <amsat-bb@amsat.org>
Sent: Saturday, September 09, 2006 12:00 AM
Subject: [amsat-bb] S-band on Eagle



Hi,

I've been following the thread about Eagle, and like many others I am sad to
hear that S-band will not fly. I do
look forward to working S-band on P3E, and hope the Eagle team will
reconsider, and fly an S transmitter, even
if it is considered a backup or emergency transmitter.

I understand why the team wants to drop it, but I have a feeling that if we
DON'T fly it, we'll wish that we had. Sort of
putting all the eggs in one basket to depend on U/v to work for the life of
the bird, isn't it? Remember AO-40 - I never
heard the S1 TX, but aren't we all glad there were two S transmitters
aboard?

I DO look forward to working U/v on Eagle, but I doubt that my budget will
allow experimenting with new
modes such as C-band anytime soon. With this in mind, as far as I'm
concerned, Eagle will be a U/v bird only.

While I won't argue that the 2.4 GHz spectrum is a 'sewer' in some areas,
I've only had serious QRM on one occasion. The
radar pulses or spread spectrum noise was cured by my radio's Noise Blanker.

One evening while copying AO-40, the bird's signal dropped completely off
the S-meter. It was like my dish had fallen off the
roof or something! Seems a neighbor down the street got a new 2.4 GHz analog
cordless telephone, and (you guessed it)
she was the dreaded full duty-cycle type - a high-school age girl!

Her phone must have broken or was returned to the store soon after (WHEW!)
I never got a chance to DF it, as I only heard it the one time, but was in
absolute
horror at the possibility of losing my S-band RX. For those of you that
doubt a non-licensed device can swamp your new downconverter, believe me,
my AIDC 3731 could hear nothing else.

On a related subject, seems like I read somewhere that some C-band
experimenters were considering using
s-band units for the final conversion from 5 GHz? In other words, the C-band
converter would only need to
convert from 5 GHz to 2 GHz, and let the surplus s-band units do the rest?
Anyone know any more about this
subject?

Another use for S-band converters might be for RF linking purposes? A small
transmitter and helix or dish at each end should work well
for control links or linking repeater sites maybe?

73,

Kyle Yoksh
KØKN
Olathe, Kansas
Amsat # 35249
VUCC Satellite # 150

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb 


_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home