[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: help with mixw



With MixW, when you go into the Packet mode, you are in-effect, in converse
mode already.

As you don't have the luxury of multiple commands like a normal packet
controller.

So as long as you have set your DIGI's path to what you want to use, when
you type any text, and hit enter, it will go out as if you were in the
Converse mode.

To set your Digis path, follow this path.  Mode, Mode Settings,
Beacon/Unproto, and set your Digis path.

Best of luck,
Walter/K5WH

-----Original Message-----
From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On
Behalf Of Nick Pugh
Sent: Tuesday, August 29, 2006 8:00 PM
To: amsat-bb@amsat.org
Subject: [amsat-bb] help with mixw

I am using Mixw and would like to send unproto packets and or get into the
convers mode. How to you do this in mixw

thanks
nick
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb




_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home