[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]
Re: Radio Shack rotators
- Subject: Re: [amsat-bb] Radio Shack rotators
- From: "Chris Hackworth" <n8phucjh@xxxxxxxxx>
- Date: Wed, 12 Jul 2006 00:27:38 -0400
- DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=UcwPQaqEE3JVYp4gtCftkiP1zA+jokJJGBdZYhr+RRBI7tiQKeRU+/vy+GH6MYyrynYvNOleP0ASisY7jIi/5Tc69dIcER7QvrU8GC+ol0/sNeYhWl2flPz9s+OyaEhxvgrJPbnDu8m+AMwRcqrMX82pPirpZWdOfvxOuQNnjkI=
- In-Reply-To: <000a01c6a564$722f4150$0500a8c0@parents>
http://www.dougbraun.com/rotor_mod.html
Ask and Google will provide!
Chris N8PHU
ET1(SW) USN Retired
Transmitter Engineer
SES-Americom
On 7/11/06, George Henry <ka3hsw@earthlink.net> wrote:
> If it can be made to provide a 0 to 5 volt DC position feedback voltage
> thru 360 degrees of rotation (or 90 or 180 degrees of elevation, if you are
> planning to use it as an elevation rotor), and can be made to turn in either
> direction by a corresponding switch closure (closing switch "A" makes it go
> clockwise, switch "B" makes it go counter-clockwise), then it should work
> with the FOD-Track interface under Nova.
>
> George, KA3HSW
>
>
> ----- Original Message -----
> From: "Robert C. Rice" <rcrice@speakeasy.net>
> To: <amsat-bb@AMSAT.ORG>
> Sent: Tuesday, July 11, 2006 7:54 PM
> Subject: [amsat-bb] Radio Shack rotators
>
>
> > At a hamfest last weekend I picked up a RS rotator (model 15-1245) for not
> > much more than lunch money.
> >
> > Now the question is whether I can put it to use in an automated way under
> > Nova.
> >
> > Bob Bruniga wrote a nice little article on controlling this rotator under
> > his APRS program.
> >
> > Is anyone aware of an easy method to have Nova drive one of these for
> > automated pointing at LEOs?
> >
> > Robert
> > WB5PKN
> > ----
> > Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> > Not an AMSAT member? Join now to support the amateur satellite program!
> > To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
AMSAT Home