[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

RE: ICOM 910H Preamp Question



Marvelous... you solved it... and now the rig puts 12v on the antenna
terminal.  Thank you.  The pre-amp is not mentioned anywhere else in the
manual except there.  Thanks... Michael K3MH

-----Original Message-----
From: owner-AMSAT-BB@amsat.org [mailto:owner-AMSAT-BB@amsat.org] On Behalf
Of Kevin Schuchmann
Sent: Thursday, June 29, 2006 7:30 PM
To: 'AMSAT-BB'
Subject: Re: [amsat-bb] ICOM 910H Preamp Question

Michael,
   sounds like you do not have preamp power for 440 enabled, in your manual
on page 59
it covers how to enable it...

73
Kevin
WA6FWF AMSAT-UK #6505
>
> Question is, when I press and hold the P.AMP button on 440 to enable the
> PRE-AMP, I get a warning tone and the PRE-AMP indicator does not come on.
> If I switch to 144, the PRE-AMP light does come on and I get a different
> tone.  Does someone know if this is a fault or a configuration problem?
>
> Michael  K3MH
> ----
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home