[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Re: InstantTrack (was Doppler)



This might help:

http://www.sysinternals.com/Utilities/Portmon.html

to see if the virtual com port is being enabled correctly.

Bob


Paul Williamson wrote:
> At 1:18 PM -0300 6/18/06, Bruce Robertson wrote:
>> other using a USB/serial interface. The latter appears as port 4 and 
>> works
>> fine with HRD and SatPC32. However, I can't get IT to control it. I've
>> tried specifying the IO and IRQ for the USB port in IT's config file. Is
>> there a diagnostic mode which will let me debug this further?
>
> There's no such diagnostic mode built into InstantTrack or 
> InstantTune. InstantTune's author has included the source code, so you 
> could theoretically add whatever diagnostics you need.
>
> 73  -Paul
> kb5mu@amsat.org
>


-- 
AMSAT VP Engineering. Member: ARRL, AMSAT-DL, TAPR, Packrats,
NJQRP/AMQRP, QRP ARCI, QCWA, FRC. ARRL SDR Wrk Grp Chairman
Laziness is the number one inspiration for ingenuity.  Guilty as charged!
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home