[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Decoding AO-16 telemetry



Hi Sion,
this is AO-16 telemetry from today :

ctrl: 3 {UI}  PID: F0 {No L3}  Total Frame Bytes: 138
from PACSAT-1 to TLM:
   1 > 61 85 1D 44 00 61 01 92 02 18 03 84 04 5C 05 A0 06 4C 07 88
  21 > 08 52 09 91 0A A1 0B D0 0C E7 0D D8 0E 10 0F 2D 10 D2 11 81
  41 > 12 00 13 BE 14 8A 15 85 16 93 17 90 18 92 19 8C 1A 8C 1B 92
  61 > 1C 83 1D 89 1E B5 1F 57 20 8C 21 65 22 70 23 4B 24 26 25 35
  81 > 26 01 27 01 28 64 29 00 2A 07 2B 01 2C 00 2D 5B 2E 66 2F 7B
 101 > 30 7C 31 7E 32 96 33 00 34 7D 35 7D 36 83 37 76 38 90 39 A9
 121 > 3A 01

translated :
----------------------------------------------------------------------------
-----------
uptime is 2226/12:31:51.  Time is Sun Mar 19 16:22:57 2006           PACSAT
Rx D DISC        0.482 k  Rx D S meter   146.000 C  Rx C DISC        6.953 k
Rx C S meter   132.000 C  Rx B DISC        1.706 k  Rx B S meter   160.000 C
Rx A DISC        2.830 k  Rx A S meter   136.000 C  Rx E/F DISC      2.690 k
Rx E/F S meter 145.000 C  +5 Volt Bus      4.911 V  +5V Rx Current   0.052 A
+2.5V  VREF      2.495 V  8.5V BUS         8.446 V  IR Detector     16.000 C
LO Monitor I     0.002 A  +10V Bus        10.500 V  GASFET Bias I    0.003 A
Ground REF       0.000 V  +Z Array V      19.437 V  Rx Temp         17.546 D
+X (RX) temp    20.572 D  Bat 1 V          1.263 V  Bat 2 V          1.267 V
Bat 3 V          1.262 V  Bat 4 V          1.280 V  Bat 5 V          1.284 V
Bat 6 V          1.254 V  Bat 7 V          1.312 V  Bat 8 V          1.299 V
Array V         20.345 V  +5V Bus          4.749 V  +8.5V Bus        8.040 V
+10V Bus        10.175 V  BCR Set Point  120.111 C  BCR Load Cur     0.528 A
+8.5V Bus Cur    0.032 A  +5V Bus Cur      0.214 A  -X Array Cur    -0.008 A
+X Array Cur    -0.021 A  -Y Array Cur     0.251 A  +Y Array Cur    -0.018 A
-Z Array Cur    -0.007 A  +Z Array Cur    -0.018 A  Ext Power Cur   -0.020 A
BCR Input Cur    0.300 A  BCR Output Cur   0.318 A  Bat 1 Temp      26.623 D
Bat 2 Temp      26.018 D  Baseplt Temp    24.807 D  PSK TX RF Out    2.468 W
RC PSK TX Out    0.005 W  PSK TX HPA Tem  25.413 D  +Y Array Temp   25.413 D
RC PSK HPA Tem  21.782 D  RC PSK BP Temp  29.648 D  +Z Array Temp   13.916 D
S band TX Out    0.726 W  S band HPA Tem   1.000 C

Total Array C= 0.251 Bat Ch Cur=-0.210 Ifb= 0.049 I+10V= 0.479
TXA:1 TXB:0 TX Pwr:B SbT:0 BCR:7C SCR:3 LP:6 HI:D BT:1E WC:25

Example for very rare activity over europe - 2 german and a swiss station ->
conversation german :-)
It work's !!!

fm PACSAT-1 to LSTAT ctl UI pid F0 [DAMA] - 15.03.06 18:50:26
I P:0x1D00 o:0 l:6654 f:7171, d:1 st:1
fm HB9SKA to DK3WN via PACSAT-1* ctl I00+ pid F0 - 15.03.06 18:50:27
Hallo Mike
fm DK5EC to JO30OR via PACSAT-1* ctl UI^ pid F0 - 15.03.06 18:50:30
=5042.15N/00714.82E-Karl 73 from Koenigswinter
fm HB9SKA to CQ via PACSAT-1* ctl UI^ pid F0 - 15.03.06 18:50:31
=4726.07N/00812.00E-********** pse connect me! **********
fm DK5EC to JO30OR via PACSAT-1* ctl UI^ pid F0 - 15.03.06 18:51:00
/00714.82E-Karl 73 from Koenigswinter
fm DK3WN to CQ via PACSAT-1* ctl UI^ pid F0 - 15.03.06 18:51:24
73 ihr beiden de Mike
fm HB9SKA to CQ via PACSAT-1* ctl UI^ pid F0 - 15.03.06 18:51:41
=4726.07N/00812.00E-********** pse connect me! **********
fm DK3WN to CQ via PACSAT-1* ctl UI^ pid F0 - 15.03.06 18:52:04
Hallo Thomas, Hallo Karl
fm DK5EC to ALL via PACSAT-1* ctl UI pid F0 - 15.03.06 18:52:49
:HB9SKA   :hallo, ist ja richtig was los hier hallo Thomas
fm DK5EC to ALL via PACSAT-1* ctl UI pid F0 - 15.03.06 18:52:54
:BLN0QSLs :DK3WN,PACSAT-1,HB9SKA{UISS41}
fm DK3WN to CQ via PACSAT-1* ctl UI^ pid F0 - 15.03.06 18:52:59
Hallo Ihr Beiden - QSL ???
fm DK5EC to ALL via PACSAT-1* ctl UI pid F0 - 15.03.06 18:53:23
... wie im Contest hi
:DK3WN    :hallo, ist ja richtig was los hier hallo Mike
fm DK5EC to JO30OR via PACSAT-1* ctl UI^ pid F0 - 15.03.06 18:53:20
=5042.15N/00714.82E-Karl 73 from Koenigswinter
fm DK3WN to CQ via PACSAT-1* ctl UI^ pid F0 - 15.03.06 18:53:33
endlich mal ein wenig Aktivität
fm PACSAT-1 to TIME-1 ctl UI pid F0 [DAMA] - 15.03.06 18:53:52
 HT: uptime is 2226/12:43:51.  Time is Sun Mar 19 16:34:57 2006
Hope, this give you stimulus!
Best 73,
Mike


----- Original Message ----- 
From: "Sion Chow Q. C. (9W2QC)" <9w2qc@9w2qc.net>
To: <amsat-bb@amsat.org>
Sent: Friday, March 17, 2006 5:37 PM
Subject: [amsat-bb] Decoding AO-16 telemetry


> Hello All,
>
> This evening I had a 75 degree pass of AO-16 over West Malaysia.  Using
1200 baud Satellite PSK mode in MixW2, I obtained the following telemetry
from AO-16.
>
> PACSAT-1>TIME-1>UI,?,F0:
> PHT: uptime is 2224/08:20:17.  Time is Fri Mar 17 12:11:23 2006
>
> PACSAT-1>TLM>UI,?,F0:
> k§.D.W.’.<..4.¢._.s.B.ž
> ¢.Î.ç
> Ù.....Ô.‚...Ð.„.‚.¤..˜...‘..’.´.W
Š!g"p#K$+%A&f'.(;).*.+.,.-p.h/}0|1z2™3.4‚5‚6„7z8„9£:.
> PACSAT-1>AMSAT>UI,?,F0:
> 1616Z 02/18/2003
> WOD Dump of Array current Channels 26,27,28,29,2A,2B
> Will Dump data for 24 hours.  AO16 Command Team <WJ9F>
>
> I had looked up the net for information on how to decode the telemetry.
However, from what I understand, I need to use software such as WISP, log
the kiss data file and input that file to the telemetry decoding program
(can't remember its name now) in order to decode the telemetry.
>
> This can be accomplished if a TNC capable of 1200 baud PSK is used.  But
in the case of MixW2, is it possible to log the data into a kiss file
format?  I am not sure if the serial port loopback method can be used to
transfer the data from MixW2 to WISP but this method is very messy, and
further more I have a shortage of serial ports.
>
> I would be glad if someone can advice me on this.  Thank you very much in
advance.
>
> 73,
> Sion Chow Q. C.,
> 9W2QC.
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home