[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: ICOM IC-910H and SSB DCW-15B Sequencer



Unfortunately, the SSB Electronics website does not have the DCW-15B manual 
online, so I couldn't look at their instructions, but typically you connect 
the PTT line from your microphone or a footswitch to the PTT-in pin of any 
sequencer, and the delayed PTT-out line then goes to the PTT pin of the 
microphone or accessory jack of the rig.  The mike audio goes straight to 
the rig, of course.  A Google search showed several ham sites with 
descriptions or schematics of their DCW-15B installations, and most appear 
to have built a small box to go between their microphone and radio, with the 
PTT line cut and rerouted thru the sequencer.

George, KA3HSW


----- Original Message ----- 
From: "Sion Chow Q. C. (9W2QC)" <9w2qc@9w2qc.net>
To: <amsat-bb@AMSAT.Org>
Sent: Friday, March 03, 2006 10:34 PM
Subject: [amsat-bb] ICOM IC-910H and SSB DCW-15B Sequencer


> Hello Group,
>
> I would like to know if anyone here has successfully wired up the ICOM
> IC-910H transceiver and the SSB DCW-15B Sequencer?
>
> The reason for asking is because I have looked into the manual but cannot
> figure out where to wire from the transceiver's end.  I did not want to 
> blow
> up the transceiver by trying so I thought it would be better to ask here
> first.
>
> Thank you very much in advance.
>
> 73,
> Sion Chow Q. C.,
> 9W2QC.
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org 
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home