[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

No Subject



Comments:on attached .WAV file
Signal was very good just some QRM from a coast guard radiofinding system who 
transmit on 437.388!!! i will have to endure this at AOS and TCA but at LOS i 
have a clear channel.

The other noise is coming from my elevation actuater.


FM is not transmitting
FM protocol is GMSK 9600bps Ax.25
FM mode is realtime 2 frames mode
Service mode is disable
The number of pictures are 0
Antenna is not deplyed
USB2Serial power is turned on
Magnet sensor power is turned off
APD 3.3V A power is turned off
APD 3.3V B power is turned off
APD main power is turned off
Camera power is turned off
ASM power is turned on
CW TX power is turned on
Amateur service RX power is turned on
FM TX power is turned on
FM packet frame number is 0
FM packet interval(sec) is 5

WDT status is disable
PDA number is 1
On board time is not synchronized
USB2Serial status is enable
Camera status is enable
Log file freq(sec) is 1
Log file mode is no access
TLE is not uplinked
Torquer control is disable
APD status is disable
APD sample freq(sec) is 5
APD file mode is no access
tether is disable
Image format is Windows bitmap
Sun sensor 1 is inactive
Sun sensor 2 is inactive
Sun sensor 3 is inactive
Sun sensor 4 is inactive
Sun sensor 5 is inactive



"-"
"It is not the class of license the amateur holds, but the class of the amateur 
that holds the license."

Luc Leblanc VE2DWE
AMSAT 33583
Skype VE2DWE
www.qsl.net/ve2dwe 
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home