[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

RE: Isolation transformer and 9600 baud.



At 01:11 AM 2/21/2006, Alan P. Biddle wrote:
>John and Mak,
>
>Clearly I was ignoring the need for low frequency response.  Thanks for the
>correction!
>
>So, if a transformer isolation is not a viable option, could one use
>capacitors on both sides of the data line to give protective isolation, and
>still handle the signal properly?   Consumer sound cards have rather unknown
>robustness.  Of course I have been operating a hardware TNC, tied to the
>computer through the serial port, for years with no smoke.

You could always use an optocoupler.

73 de VK3JED
http://vkradio.com
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home