[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: mounting a u-110 elevation rotator

At 01:09 PM 2/6/2006 -0500, Carl Yaffey wrote:

>I'm looking for ideas for mounting a U-100/110 elevation rotator to a
>mast. The article in the December 1998 QST describes using a treated
>block of wood. That would certainly work, but I'd like to find a way
>to do it with metal.
>Any thoughts?

Hi Carl,

I mounted an OR-360 which is very similar by
cutting two 6" pieces of 2" x 2" x 1/8" aluminum angle
stock and bolting it to a short piece of 1.25"
aluminum tubing, see attached photo.

Tony AA2TX

[demime 1.01d removed an attachment of type image/jpeg which had a name of Elevationrotor.jpg; x-mac-type=4A504547; x-mac-creator=4A565752; x-avg-checked=avg-ok-3A472CDE]
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org