Re: [amsat-bb] mounting a u-110 elevation rotator

[Gene Marks WB2LLP <wb2llp@xxxxxxxxxxxxx>]

Carl,

There are two ways.  If the mast can be threaded, get a floor flange from your
hardware store and thread it onto the mast.  The holes on the flange can be
re-drilled to match the U-100/110 bolts.  A second way is to get a piece of
thick aluminum about 4"  x 8"  and bend it in half.  On one half drill for a
pair of mast clamps.  On the other side drill mounting holes for the 110 bolts.
With a little care, you can end up with the 110 over the center of the mast.

Gene  Marks   WB2LLP
AMSAT 33182
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org