Re: [amsat-bb] Digital station setup help

["Jeff Griffin" <kb2m@xxxxxxxxxxx>]

OOPS. I just worked AO-51. It  was back up in PACSAT mode last pass. The 
digi is also on....

73 Jeff kb2m

----- Original Message ----- 
From: "Jeff Griffin" <kb2m@comcast.net>
To: <amsat-bb@AMSAT.Org>
Sent: Sunday, January 15, 2006 10:12 AM
Subject: Re: [amsat-bb] Digital station setup help


> I too have given up on automated multi satellite digital operation. This 
> is not a problem as we don't have a whole lot of digital sats(PACSATS) 
> online right now. At the apex of digital sats their were at least 5 
> operational. As I speak this morning,  there are none. I switched to 
> single sat manual when I moved up to XP. There are ways to run auto, see 
> WiSP DDE , I haven't tried to as I have no need but there has been talk 
> about running it here on the SIG. I did a quick look but came up empty. I 
> use SATPC32 for Doppler, and ant pointing, and just run MSPE for PACSAT 
> use. Run WiSP for initial setup of MSPE...
>
> 73 Jeff kb2m
>
> ----- Original Message ----- 
> From: "James C. Hall, MD" <heartdoc@nwtcc.com>
> To: "'Stefan Wagener'" <stefan_wagener@hotmail.com>; <amsat-bb@amsat.org>
> Sent: Sunday, January 15, 2006 1:25 AM
> Subject: RE: [amsat-bb] Digital station setup help
>
>
>> Hi Stefan:
>>
>> This seems like the best idea for me as I don't plan, at this time, to 
>> set
>> up automated operation ... but it would be nice someday !
>>
>> Thanks and 73, Jamie
>> WB4YDL
>>
>> -----Original Message-----
>> From: owner-AMSAT-BB@amsat.org [mailto:owner-AMSAT-BB@amsat.org] On 
>> Behalf
>> Of Stefan Wagener
>> Sent: Saturday, January 14, 2006 5:05 PM
>> To: 'James C. Hall, MD'; amsat-bb@amsat.org
>> Subject: RE: [amsat-bb] Digital station setup help
>>
>> Hi Jamie,
>>
>> One of the options is to use the programs for a single task (only).
>>
>> Use SatPc for doppler control,
>>
>> Use unitrac for the rotor, and use WISP only for initially setting up the
>> TNC and the satellites and MSPE.
>>
>> When the sat is AOS just run MSPE for your TNC. Don`t start GSC after the
>> initial setup.
>>
>> This works well for me, however, it means manually starting MSPE once the
>> bird is in sight.
>>
>> 73, Stefan VE4NSA
>>
>>
>> -----Original Message-----
>> From: owner-AMSAT-BB@AMSAT.Org [mailto:owner-AMSAT-BB@AMSAT.Org] On 
>> Behalf
>> Of James C. Hall, MD
>> Sent: January 14, 2006 4:33 PM
>> To: amsat-bb@AMSAT.Org
>> Subject: [amsat-bb] Digital station setup help
>>
>> Hello:
>>
>>
>>
>> I've spent a good part of the day trying to setup the software and 
>> hardware
>> so they will play nice together with Wisp. First I set up Wisp as per the
>> instructions in the new Digital Satellite Guide. Everything went smoothly
>> except the times for my chosen birds (AO-51 and GO-32) are way off - as 
>> if
>> the keps or station location (long/lat) didn't take. I'm using Wisp
>> presently as a demo until I get my registration from AMSAT.
>>
>>
>>
>> I have been using a Uni-trac interface with my FT-847. I have been using 
>> the
>> unitrac applet and SatPC32 for voice operation. This requires me to run 
>> my
>> FT-847 direct serial connection to my computer, so the unitrac runs the
>> rotor and SatPC32 runs the radio. Now with Wisp, I have a 3rd program to
>> run. What is the correct way to interface all this ?? If I set the Rotor 
>> in
>> Wisp to DDE and the Unitrac Config file to DDE, I can track the bird in 
>> the
>> sky.  But what about tuning the radio ? I don't see anything in Wisp to
>> chose radio, com port, etc to Doppler control the radio, and I'm not sure
>> you can have 2 DDE links to one program.
>>
>>
>>
>> Little help please !
>>
>>
>>
>> 73, Jamie
>>
>> WB4YDL
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org