[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Spirit-2 and FT-847



On Thu, 2005-12-29 at 00:43 -0600, James C. Hall, MD wrote:
> Is the diagram in the '847 manual for the packet connector correct ??
> I have run into this before with Yaesu printing incorrect cable
> configurations.

Yes - the manual is correct.  Are you connecting pins 1-4 on the PKT
jack?  You shouldn't need the others IIRC.


> (BTW, I do have the pin 7 grounded per the manual for non-matched baud
> for RX/TX).
> 

I will assume you mean pin 7 on the TNC since the PKT connector only has
6 pins.  

73's

Don Woodward
KD4APP
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home