Re: [amsat-bb] Copying ECHO on D700 front panel

["Robert Bruninga" <bruninga@xxxxxxxx>]

> The D7 and  D700 APRS radios are APRS 9600
> baud satellite ready.  Just need digipeating 
> enabled on ECHO...

To see all the things we could do with the D7 and
D700 via ECHO if digipeating was enabled see:

http://www.ew.usna.edu/~bruninga/echoaprs.html 

de Wb4APR

At 06:07 PM 11/29/2005, Robert Bruninga wrote:
>I finally remembered to tune in ECHO downlink
>on 435.150 on my D700 in APRS mode and
>with the PAC-MON button pushed, the following
>shows up on the radio front panel:
>
>PECHO-11>PBLIST:PB: Empty
>PECHO-11>PBLIST:PB: Empty
>PECHO-11>PBLIST:PB: Empty
>PECHO-11>PBLIST:PB: Empty
>PECHO-11>PBLIST:PACBLS S Meter 0
>PECHO-11>PBLIST:PB: Empty
>PECHO-11>PBLIST:PB: Empty
>PECHO-11>PBLIST:PB: Empty
>PECHO-11>PBLIST:PB: Empty
>etc...
>
>Looks like no one was using it.
>
>I bet a lot more people would use it if they
>would just enable the digipeat bit.  Then
>any two D7 or D700 users could do
>radio-to-radio front-panel-to-front panel
>digital messaging and APRS while mobile.
>
>de WB4APR
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org