RE: [amsat-bb] Help hand antenna

["Reicher, James" <JReicher@xxxxxxxxxxx>]

Doesn't the TH7D have a built-in diplexer? After all, it does use a
single rubber duck.  If so, all that is needed is a t-connecter to join
the two feeds together.

73 de N8AU, Jim in Raymore, MO

-----Original Message-----
From: owner-AMSAT-BB@amsat.org [mailto:owner-AMSAT-BB@amsat.org] On
Behalf Of jmeek@gaslightmedia.com
Sent: Tuesday, November 22, 2005 12:31 PM
To: 3294196393; amsat-bb@amsat.org
Subject: Re: [amsat-bb] Help hand antenna

> Hi all, 
> i have a hand 2m 70cm antenna and i have to connect at my Kenwood
Thd7.
> How have to be done the connections from the two cables to the antenna
and the
the radio
connector?
> Thanks for kind help
> 
> IZ3ALU WALTER CORTINA ITALY

Walter,
You need a diplexer to combine the two feeds for your THD7 antenna
input.
Go here:
http://home.datacomm.ch/hb9abx/duplexer.html for good homebrew
instructions
Good luck & 73
John Meeks
KC8ZFN

---------------------------------------------
This message was sent using Gaslight Media's Web Mail.
http://www.gaslightmedia.com/
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org