[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: G-5500 & SATPC32 now KCT and Satscape



Jim:
Fodtrack does it
73
Ignacio

----- Original Message ----- 
From: "Jim Wright" <wa4ivm@AMSAT.Org>
To: "Jeff Griffin" <kb2m@comcast.net>
Cc: "Amsat BB" <amsat-bb@AMSAT.Org>
Sent: Tuesday, November 08, 2005 6:08 PM
Subject: Re: [amsat-bb] G-5500 & SATPC32 now KCT and Satscape


> I do not, yet, have SATPC32, but the author of my rotor control device
> recommended calibrating the G5500 at ZERO and THREE-SIXTY instead of
> FOUR- FIFTY.  This should put the full voltage swing from the G5500
> available to the program for status feedback.  There may be some
> software developer working on the FOUR-FIFTY, but I have not seen it
> mentioned on this -bb.
> Good luck.
> 73,
> Jim AMSAT #31517
>
> Jeff Griffin wrote:
>
> > Got some emails about using WiSPDDE with Satscape, saying it will do
> > 450 degree rotor control. Looking at Satscape / WiSPDDE configuration
> > and I don't see it working with the KCT? I wonder why. Also the last
> > update to Satscape was in 2004, ver 2.02?
> >
> > 73 Jeff kb2m
> >
> > ----- Original Message ----- From: "Jeff Griffin" <kb2m@comcast.net>
> > To: "Amsat BB" <amsat-bb@amsat.org>
> > Sent: Monday, November 07, 2005 6:58 PM
> > Subject: [amsat-bb] G-5500 & SATPC32
> >
> >
> >> I don't see anyway to setup the G-5500 (or any other 450 degree
> >> rotor) with SATPC32. I got it working fine but only at 360 degrees.
> >> Am I missing something?
> >>
> >> 73 Jeff kb2m
> >
> > ----
> > Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> > Not an AMSAT member? Join now to support the amateur satellite program!
> > To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home