[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: G-5500 & SATPC32 now KCT and Satscape



Jeff,
You can always type P45 in the manInput box of the little ServerSDX that starts
with SatPC32 if your controller interface understands Yaesu commands. Downside
is you have to do it every time you restart SatPC32.
73
John 
KC8ZFN

>  Got some emails about using WiSPDDE with Satscape, saying it will do 450 
> degree rotor control. Looking at Satscape / WiSPDDE configuration and I 
> don't see it working with the KCT? I wonder why. Also the last update to 
> Satscape was in 2004, ver 2.02?
> 
> 73 Jeff kb2m
> 
> ----- Original Message ----- 
> From: "Jeff Griffin" <kb2m@comcast.net>
> To: "Amsat BB" <amsat-bb@amsat.org>
> Sent: Monday, November 07, 2005 6:58 PM
> Subject: [amsat-bb] G-5500 & SATPC32
> 
> 
> >I don't see anyway to setup the G-5500 (or any other 450 degree rotor) with 
> >SATPC32. I got it working fine but only at 360 degrees. Am I missing 
> >something?
> >
> > 73 Jeff kb2m
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> 


---------------------------------------------
This message was sent using Gaslight Media's Web Mail.
http://www.gaslightmedia.com/
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home