[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: help with satpc32

First, did you copy SuM.exe and all of its associated files to the SatPC32 
folder?  It depends on some of SatPC32's auxiliary files, and therefore must 
reside in the same folder.  Second, what type of rotor interface are you 
using?  You must also copy the appropriate files from the subfolder for your 
rotor interface to the SatPC32 folder.
Finally, per the SuM readme file, you can't steer the rotor from within 
SatPC32 using the R+ button if SuM is running...  only one program can have 
control of the rotor interface at a time.

George, KA3HSW

----- Original Message ----- 
From: "nick pugh" <quadpugh@bellsouth.net>
To: <amsat-bb@amsat.org>
Sent: Friday, September 23, 2005 6:29 AM
Subject: [amsat-bb] help with satpc32

>I have a new problem with SuM.exe. The rotator does not move to the Az El
> parameters on the screen when the R+ button is clicked.
> thanks in advance
> nick
> ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org