[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Rotator position feedback



Hi Andrew VK4TEC

Standard is 0 to 5 volt DC from the cursor of a 500 ohm 
potentiometer located inside of each rotator both for 
Azimuth and Elevation

73" de

i8CVS Domenico

----- Original Message ----- 
From: "Andrew Rich" <vk4tec@tech-software.net>
To: "Amsat-Bb" <amsat-bb@amsat.org>
Sent: Sunday, September 04, 2005 12:55 PM
Subject: [amsat-bb] Rotator position feedback


> Gents,
> 
> What position output do the more expensive rotators have ?
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home