[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

RE: Help -PCSAT2 Setup Kenwwod TH-7AG for APRS



You have to tell the TNC which band to transmit on and which band to receive
on. Try this:

Press the MENU button
Select APRS, press OK
Select Data band, press OK
Select A:TX B:RX (assuming you have the A band (top of display) on 2 meters
and the B on 70 cm.
Press OK, press ESC, press ESC
That should do it.


The DUP selector just enables full duplex audio.

Kenneth - N5VHO

-----Original Message-----
From: owner-AMSAT-BB@amsat.org [mailto:owner-AMSAT-BB@amsat.org] On Behalf
Of Jerry Weihrauch
Sent: Thursday, September 01, 2005 11:39 AM
To: AMSAT-BB
Subject: [amsat-bb] Help -PCSAT2 Setup Kenwwod TH-7AG for APRS


Has anyone setup their Kenwood TH-7A(G) for duplex mode for APRS on PCSAT2?
Have tried but somehow the transmit ends up on 435.275 selecting DUP. What
am I doing wrong? 

TIA,

Jerry  -  K0HZI
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author. Not
an AMSAT member? Join now to support the amateur satellite program! To
unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home