Re: [amsat-bb] TS-2000 Question

[Luc Langehegermann <luc2@xxxxxxxx>]

An other way is simply using the sub band Transceiver as the uplink 
radio. Does only work if you have FM on the uplink though.

For Programmers: simply use FC to set the frequency, instead of FB as in 
Satellite mode.

Used this in the ts2000 driver for ktrack.

73, Luc


Simon Brown (HB9DRV) wrote:
> This is achieved with full Doppler control by using split mode + XIT 
> while transmitting - I have tested this with Henk PD5DP and he has 
> confirmed that it works.
> 
> So in RX just change the frequency, in TX the frequency cannot be 
> changed but XIT can :-)
> 
> Simon Brown
> ---
> www.hb9drv.ch www.laax.ch
> 
> RSGB HF Convention: Friday 7th - Sunday 9th October 2005
> Holidays: Monday 10th - Thursday 20th October 2005
> 
> ----- Original Message ----- From: "Matt Bennett" <kaisermuche@yahoo.com>
> 
> 
>> I was wondering if any TS-2000 owners have used their
>> rigs for same-band SAT ops (NO-44, ISS, etc). It
>> appears that this can be accomplished outside of SAT
>> mode using same-band receive, but has anyone used
>> computer control to auto-tune the VFOs during a Sat
>> pass??
> 
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org