Re: [amsat-bb] Kenwood D700 and Doppler (PCSAT2)

["Andrew Rich" <vk4tec@xxxxxxxxxxxxxxxxx>]

I have had some success with wispDDE client and NOVA DDE

What you haev to do is run an external TNC or make your freq changes 
really quick.



> This is a multi-part message in MIME format.
> 
> Robert Bruninga wrote:
> > APRStk will do it, but I lost the source code
> > and so have not updated it in years, but it does
> > work.  APRStk will also point a simple radio-shack
> > or any kind of simple rotator with a simple
> > 2 bit interface to the parallel port.
> > 
> > But again, I havent had time to support the
> > software, document it well, or anything else,
> > so I dont push it.  But it will work..  if you have
> > the patience to figure out what I did... hi hi..
> > 
> > Will run on anything from a 386 upwards with
> > at least a 20 MHz processor.
> > 
> > If someone else is runnning it, maybe they can
> > do a simple write up on it..
> > 
> > de Wb4APR, BOb
> > 
> > 
> >>>>"Andrew Rich" <vk4tec@tech-software.net> 08/22/05 11:23 PM >>>
> 
> Bob, Andy.  Possibly the two programs attached here will do it for
> you.  I found them in my very old archives!!  Cliff K7RR
> 
> 
> 
> 
> 

-- 
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org