[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: IC-910 with UX-910, remote control



Werner,

Just send the frequency set command with a valid 1200Mhz frequency to the
desired VFO and the radio will change the band for you.  No special command
needed.  FYI, that "new" band can not be active in the opposing VFO.

73 KE4AZN
Mike


----- Original Message ----- 
From: "Werner H. Berli" <w.h.berli@bluewin.ch>


> Does anyone happen to know the command via the CI-V remote control
> interface to activate the UX-910 (1200 MHz) option.
>
> This command is not documented in the manual.
>
> To do this manually from the frontpanel I would depress the M/S-button
> for 1 second while both the main and subchannels are on the display.
>
> 73
> Werner, HB9US

Mike Kingery
mkingery@centurytel.net
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home