Re: [amsat-bb] IC910H

[Patrick Green <pagreen@xxxxxxxxx>]

He's talking about 2m EME and splitting the 2m TX from the 2m RX to
another connector.  Is that possible?  I don't have a 910H but I doubt
it can do it.

73 de Pat --- KA9SCF.
Amsat #35741

On 7/13/05, Charlie Schlieper <n5td@vvm.com> wrote:
> Uhhhhh, the IC910H has a "common RF connector?"
> Are they making them different now with the current
> production runs?
> 
> I have a fully loaded IC910H, and it has three seperate
> RF connectors-- one for 2m, 70cm, and 1.2GHz.
> What am I missing here?
> 
> As a matter-of-fact, I used a low-loss TRI-PLEXER
> for a while to join the three seperate rf ports, to ONE
> common multi-band "magmount" antenna for portable
> use.
> 
> Charlie, N5TD
> 
> ----- Original Message -----
> From: "Jacques RAMBAUD" <f6bki@wanadoo.fr>
> To: <AMSAT-bb@amsat.org>
> Sent: Tuesday, July 12, 2005 3:01 PM
> Subject: [amsat-bb] IC910H
> 
> 
> > Hello,
> > I am planing to use the IC910H for 2m EME.
> > This radio has a common RF connector for transmit and receive.
> > As anyone found a way to modify the radio to have a separate receive and
> > transmit RF port?
> > 73
> > Jacques F6BKI
> > ----
> > Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> > Not an AMSAT member? Join now to support the amateur satellite program!
> > To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org