[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: IC910H



Uhhhhh, the IC910H has a "common RF connector?"  
Are they making them different now with the current
production runs?

I have a fully loaded IC910H, and it has three seperate
RF connectors-- one for 2m, 70cm, and 1.2GHz.
What am I missing here?

As a matter-of-fact, I used a low-loss TRI-PLEXER
for a while to join the three seperate rf ports, to ONE
common multi-band "magmount" antenna for portable
use.  

Charlie, N5TD

----- Original Message ----- 
From: "Jacques RAMBAUD" <f6bki@wanadoo.fr>
To: <AMSAT-bb@amsat.org>
Sent: Tuesday, July 12, 2005 3:01 PM
Subject: [amsat-bb] IC910H


> Hello,
> I am planing to use the IC910H for 2m EME.
> This radio has a common RF connector for transmit and receive.
> As anyone found a way to modify the radio to have a separate receive and
> transmit RF port?
> 73
> Jacques F6BKI
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home