[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

RE: S-Band Doppler correction with WISPDDE



Thanks to Nick and George for replying to my question.

I have set the transverter in WISP and it now outputs via DDE to WISPDDE
client with the converted frequency in the 2M band.

Many thanks once again for your help and have a nice field day to everyone.

73,
Sion Chow Q. C.,
9W2QC.



-----Original Message-----
From: Nick Adiletto [mailto:K1UXBMA@comcast.net] 
Sent: Friday, June 24, 2005 11:57 PM
To: Sion Chow Q. C. (9W2QC)
Subject: Re: [amsat-bb] S-Band Doppler correction with WISPDDE

Hi Sion;
go into Setup>Station properties>Transverters>   Then go into
Wispdde>Settings>Radio>index> select rig>port>Baud>Freq range> Reboot

GL73
Nick K1uxb


----- Original Message ----- 
From: "Sion Chow Q. C. (9W2QC)" <9w2qc@9w2qc.net>
To: <amsat-bb@AMSAT.Org>
Sent: Friday, June 24, 2005 06:37 AM
Subject: [amsat-bb] S-Band Doppler correction with WISPDDE


> Hello Group,
>
> Currently, I am using WISP and WISPDDE client to control my rotator and
> radios.  The present setup allows automatic Doppler correction on 2M, 70
CM
> as well as antenna steering.  In the present setup, I am using a Yaesu
> FT-847 for 2M and 70 CM work and an ICOM IC-R7000 for S-Band receiving.
>
> 2M or 70 CM Doppler correction works perfectly with the ICOM IC-R7000.
> However, when I attempt to enter 2401.200 (AO-51's S-Band downlink) into
> WISP and select it in MSPE, WISPDDE gives an error and exit.  Does anyone
> know a workaround for this as I would like to be able to use WISP and
> WISPDDE client to automatically control the S-Band Doppler on the ICOM
> IC-R7000.
>
> Thanks a lot in advance.
>
> 73,
> Sion Chow Q. C.,
> 9W2QC.
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home