[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]
Re: IC-W32A for satellite work
according to my manual on my w32a,
1. Turn power [(H/L)SET] to enter initial set mode.
2. Push [(H/L)SET ^] or [(tone) v] several times unitl "CB" appears as shown
above --- either FULL CB or SEMI CB appear on the screen ---
3. Rotate [DIAL] to select semi-duplex or full duplex
4. Turn power OFF to exit initial set mode
Note---- I have used the ^ to indicate the up arrow and v to indicate the down
arrow
One personal note: when you select full duplex you must use a earphone and mic
that are separate. If you use a speaker mic, you will create wonderful feedback
tones that everyone on the satellite will be amused by.
73...bruce
Bruce Paige, KK5DO
AMSAT Director Contests and Awards
ARRL Awards Manager (WAS, 5BWAS, VUCC), VE
Houston AMSAT Net - Wed 0100z on W0KIE AMC-7,
T5, 7.5Mhz
Also streaming MP3 at http://www.amsatnet.com
Latest satellite news on the ARRL Audio News
http://www.arrl.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
AMSAT Home