[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Problems FT847 and serial control



Andre,

Perhaps a full reset of the rig's CPU will fix it?

73,

Mark N8MH
> 
> From: Andre PH7AT <ph7at@ph7at.net>
> Date: 2005/04/27 Wed AM 11:44:02 EDT
> To: amsat-bb@AMSAT.ORG
> Subject: [amsat-bb] Problems FT847 and serial control
> 
> Hi all,
> 
> I own a Yaesu FT847 transceiver which I use mainly for satellite work.
> I use SatPC32 for automatic dopler correction of uplink and downlink 
> frequencies.
> I also used Ham Radio Deluxe 3.0.8 for PSK31 operation on HF (PTT control).
> This worked perfectly until some weeks ago.
> 
> Ham Radio Deluxe cannot connect to the FT847 anymore.
> In SatPC32 I can switch the FT847 to satellite mode and the uplink and 
> downlink
> frequencies are set. But after that neither frequency is updated.
> If I toggle satellite mode off/on (in SatPC32) the uplink and downlink 
> frequencies
> are set to the current values again but no more updates after that.
> 
> At first I thought the MAX232 IC was broken but I'm not sure as the 
> FT847 still
> receives data from SatPC32.
> 
> Does anyone here have had simular problems? I would like to hear your 
> suggestions.
> 
> 73,
> 
> Andre PH7AT
> www.ph7at.net
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home