[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Doppler Control Software with USB/Serial Adapter



I am using SatPC32 with a BAFO USB-to-serial adapter and a homebrew CT-17 
clone with my 910H, and it works just fine...  do you have the latest 
drivers for your adapter, and are you sure that you have the correct COM 
port selected?  The correct address for your radio?  And do your port and 
radio baud rates match?  Not familiar with RATS, so I don't know what other 
port configuration is required.

George, KA3HSW

----- Original Message ----- 
From: <ka5sma@bellsouth.net>
To: <amsat-bb@amsat.org>
Sent: Thursday, April 21, 2005 2:51 PM
Subject: [amsat-bb] Doppler Control Software with USB/Serial Adapter


> anyone have experience with Serial/USB adapter with doppler control
> software...have tried RATS  software and cannot get it to work..??
>
>
>
>
> Mike KA5SMA
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home