[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: More progress on P3e MODE-UV



Does that mean that the future Phase 3 Express won't have UV analog (SSB&CW)
transponder?

73s de Pedro EB4DKA
www.eb4dka.tk


----- Original Message ----- 
From: "i8cvs" <domenico.i8cvs@tin.it>
To: "AMSAT-BB" <amsat-bb@amsat.org>; "William Leijenaar" <pe1rah@yahoo.com>
Sent: Thursday, April 14, 2005 4:41 PM
Subject: Re: [amsat-bb] More progress on P3e MODE-UV


>
> Hi William, PE1RAH
>
> I was looking at the above page and the transponder Mode-UV that
> you are building for P3E is a nice job congratulations !
>
> I was looking as well at
> http://www.amsat.org/amsat-new/express/
>
> The dowlink transmitters table on this page reports only the frequency
> for the GB for the EB and 145.837 MHz (V) for multimode low speed
> RUDAK
>
> According to the above table it seams that P3E will not use a Mode-UV
> linear transponder because the 2 meters downlink passband of it is not
> indicated.
>
> Do you know why ?
>
> Tank you for your answere and 73" de
>
> i8CVS Domenico
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home