[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

RE: Echo Status 11 Mar



Yeah, it'1 back.  Nice signals here in CM98 on the 0400 pass.

But, what downlink frequency should I be using, pre-doppler?  It seems like 
it needs to be about 5khz high (435.305) in order for the adjusted frequency 
to work.  I'm running Predict 2.2.1 on my SuSE 9.1 Linux box, with a 
homebrew client to drive the radio.

Greg  KO6TH


----Original Message Follows----
From: "Mike Kingery" <mkmk518@graceba.net>
To: "Amsat List" <amsat-bb@amsat.org>
Subject: [amsat-bb] Echo Status 11 Mar
Date: Fri, 11 Mar 2005 11:06:29 -0600

All required software is loaded back up on AO-51 and running.  We will turn
on the FM repeater and the PBBS for user activity tonight barring any
unforeseen event.

One item that is being tested is the PBBS call sign.  You will need to
change your Wisp or PB setup for AO-51 to reflect the change in the call
sign.  Replace PACB-11 and PACB-12 with PECHO-11 and PECHO-12.  P for
PacSat, and ECHO for, well, I hope you can figure that one out.

Monday night we will turn off the FM repeater and PBBS to run a controlled
test on the PBBS.

There are a couple of hamfests and a demo going on this weekend.  So listen
for those and give them a call.

73 KE4AZN
Echo Command Team
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home